Full X900 printhead changing tutorial, the appropriate servprog.exe file to sync your head, email support if needed.
Service manuals and servprog.exe files for the following machines:
$45 VS $1000 or more, depending on your location service calls can be a LOT more.
Stream the X900 head changing tutorial for 30 days, request service manuals, request servprog.exe files, request email support – and get yourself back to printing!
Trust me you can change your own X900 printhead all by yourself, with the very detailed and thoroughly explained help of this video. You will need a servprog.exe file to sync your new head, I can help with that. I used to do all this for donations, which only about 2% of users offered in return. To those who responded by donating, I thank you sincerely. To everyone else I am happy you are up and printing again.
That was the past, this is the future. Rent this video for $45, save yourself $1,000 (sometimes more), and email me with any questions you like. You get the video for 30 days, you get the appropriate servprog.exe program for your machine, you get my email support (which you will not need if you follow the video as patiently and thoroughly as I created it for you).
As for what you are up against changing your head, Epson will sell you a replacement head. All you need to do is install it. This video shows you how, one step at a time.
Note*: the final step of your new head install will be registering the numbers on the head to the printer, using a PC-only program called “servprog.exe”. It is rare but some people have had problems with the software not recognizing the printer due to them using an incompatible windows version. If this happens to you, here is a solution from a fellow Epson head changer, David Lorenz:
Good luck my friends.
If you feel you’ve got something valuable from MYX900.com, please help keep it alive! Any donation you feel is appropriate will go toward funding the research, development, and maintenance of this site. For your security and convenience we accept paypal donations, please follow the link below. And thank you for helping back!
*note: While I may be depressed if you tell me you broke your machine in half trying to fix it, I am not responsible. Any technical help shared on MYX900.com is based on our own do-it-yourself hands-on experiences. Your choice to follow our experiences, is your choice. Good luck! : )